The entire disk, including volume headers, will be compressed.
To compress the entire disk including volume headers, check this box.
Type the number of sectors per compressed chunk. (defaults: 20 for KenCode, 512 for ADC)
Use this pop-up menu to select the default image format for new images.
Not available because the necessary system software to support HFS+ volumes is not installed.
Use this pop-up to select the default file system used on new images.
Makes a floppy from a disk image. Not available because your current hardware configuration does not support this function.
Not available because the image you are trying to save cannot be mounted on this Mac‚Ñ¢ OS computer.
Click here to skip the authentication/verification - this is NOT recommended.
This format is not available because compressed formats are only available on 68020 or better processors.
Disk Copy can use PlainTalk‚Ñ¢ to speak dialogs and other informational messages. Not available because PlainTalk‚Ñ¢ is not installed.
This displays the reason why the operation failed.
This displays the operation that failed.
This list shows the volumes mounted on your desktop. Double-click a volume to select it.
This button ejects the disk named above. The button is not available because the item listed above is not an ejectable disk.
To eject the disk named above, click this button.
To close the dialog without selecting a volume, click this button.
To use the selected volume, click this button. The button is not available because nothing is selected.
To use the selected volume, click this button.
Click here to select the current directory.
This cancels the operation in progress.
Information regarding the DigiSign‚Ñ¢ digital signature of the last disk image operated upon (if any) is presented here.
Information regarding the checksum of the last disk image operated upon (if any) is presented here.
The volume name of the last disk operated upon appears here.
The name of the last disk image operated upon appears here.
Information regarding the last operation performed is presented here.
Disk Copy will use PlainTalk‚Ñ¢ to speak dialogs and other informational messages.
To use PlainTalk‚Ñ¢ to speak dialogs and other informational messages, click this box.
Disk Copy will confirm before erasing a disk and copying new data to it.
To confirm before erasing a disks and copying new data to it, click this box.
Disk Copy will make multiple floppies from the same image.
To make multiple floppies from the same image, click this box
Disk Copy will save log window contents in the "Disk Copy Log" file in the Preferences folder.
To save log window contents, click this box.
Disk Copy will display dialogs and alerts for error messages.
To display dialogs and alerts for error messages, click this box.
Type the default volume name for new images in this box.
Use this pop-up menu to select the default size for new images.
Type the default extension Disk Copy will add to the name of newly created volumes in this box.
Type the default extension Disk Copy will add to the name of newly created images in this box.
Disk Copy will default to attach a DigiSign‚Ñ¢ signature to newly created images after saving.
To default to attach a DigiSign‚Ñ¢ signature to newly created images after saving, click this box.
Disk Copy will default to mount newly created images after saving.
To default to mount newly created images after saving, click this box
Disk Copy will default to write zeros to a newly created image before copying data to it.
To default to write zeros to a newly created image before copying data to it, click this box.
Disk Copy will not verify the checksum or DigiSign‚Ñ¢ signature of images residing on AppleShare servers (if signed).
Disk Copy will verify the checksum or DigiSign‚Ñ¢ signature of images residing on AppleShare servers (if signed).
Disk Copy will not verify the checksum or DigiSign‚Ñ¢ signature of images referenced from DiskScripts or DiskSets (if signed).
This not available because no verification options above are selected.
Disk Copy will verify the checksum or DigiSign‚Ñ¢ signature of images referenced from DiskScripts or DiskSets (if signed).
Disk Copy will default to verify the DigiSign‚Ñ¢ signature of images (if signed).
To default to verify the DigiSign‚Ñ¢ signature of images (if signed), click this box.
Disk Copy will default to verify the checksum of images to be mounted, or converted.
To default to verify the checksum of images to be mounted, or converted, click this box.
To close the dialog without saving the Preferences settings, click this button.
To save changes to the Preferences settings and close the dialog, click this button.
Use this pop-up menu to change units from blocks (512 bytes), K (kilobytes), or MB (megabytes).
Type the size of the image in this box.
To close the dialog without saving the settings, click this button.
To save changes to the settings and close the dialog, click this button.
This ejects the floppy.
This skips the current image in the set of images that you are making floppies from.
To stop the make floppy operation, click this button.
The size of the selected disk or folder is currently shown. Use this pop-up menu to select a different size for the image.
Disk Copy will attach a DigiSign‚Ñ¢ signature to the image after it is saved. The defaults for this feature can be set in the Preferences dialog.
To add a DigiSign‚Ñ¢ signature to the image after saving, click this box.
Disk Copy will mount the image after it is saved. The defaults for this feature can be set in the Preferences dialog.
To mount the image after it is saved, click this box.
Use this pop-up menu to select the format of the image.
This is not available because the image format cannot be changed.
Disk Copy will verify the DigiSign‚Ñ¢ signature of images (if signed). The defaults for this feature can be set in the Preferences dialog.
Not available because the DigiSign‚Ñ¢ extension is not installed, or you have selected a read/write image format, which cannot be signed.
To verify the DigiSign‚Ñ¢ signature of images (if signed), click this box.
Disk Copy will verify the checksum of images. The defaults for this feature can be set in the Preferences dialog.
To verify the checksum of images, click this box.
To eject the current disk and insert another to be used, click this button.
To erase the selected disk and copy new data to it, click this button.
To cancel the current operation, click this button.
To continue the current operation, click this button.
Type the maximum match length for the compressor here (larger values are slower but can yield more compression).
Detailed compression statistics will be shown.
To show detailed compression statistics, check this box.
ADC compression will be used.
To use ADC compression, click this button.
KenCode compression will be used.
To use KenCode compression, click this button.
Disk Copy will write zeros to the newly created image.
To write zeros to the newly created image, click this box.
Use this pop-up menu to select a size for the new image.
Type the name of the image in this box.
To close the dialog and cancel the create image operation, click this button.
To create a new empty read/write disk image with the selected name and size, click this button.
To dismiss the dialog, click this button.
"MB" standards for "megabytes" which is equivalent to 1024 kilobytes.
"K" stands for "kilobytes" which is equivalent to 1024 bytes.
"blocks" are equivalent to 512 bytes.
This format uses the Disk Copy 4.2 file format. It is not available because the image size selected is not a standard floppy disk size (720K, 800K, or 1.4MB).
This format creates a Disk Copy 4.2 format disk image. You will not be able to make any changes to the disk image when it is mounted. It only supports standard floppy disk sizes (720K, 800K, or 1.4MB).
This creates a compressed read-only disk image. You will not be able to make any changes to the disk image when it is mounted, and it will be smaller than images in other formats.
This format creates a read-only disk image. You will not be able to make any changes to the disk image when it is mounted, as if it were a locked floppy disk or CD-ROM.
This format creates a read-write disk image. You will be able to make changes to the disk image when it is mounted as if it were a standard floppy or hard disk.
Use this menu to execute AppleScripts stored in the Scripts folder.
Displays a dialog box which allows you to select an image file to verify its DigiSign‚Ñ¢ digital signature.
Not available because the DigiSign‚Ñ¢ extension is not installed.
Displays a dialog box which allows you to select an image file, then add a DigiSign‚Ñ¢ digital signature to the image.
Displays a dialog box which allows you to select an image file and verify that the checksum of the selected image is valid.
Displays a dialog box which allows you to select a volume, then calculate a CRC-32 checksum of the volume.
Displays a dialog box which allows you to select a disk image from which to make a floppy. When making PC-formatted floppies, the PC Exchange control panel must be installed. DMF format requires Mac‚Ñ¢ OS 7.6 or greater.
Use this menu to make floppies from disk images, calculate checksums, verify checksums and use DigiSign‚Ñ¢ digital signatures.
Displays a dialog box which allows you to select a disk image to be converted to a specific format. Disk Copy supports Read/Write, Read-Only, Read-Only Compressed, and Disk Copy version 4.2 formats.
Displays a dialog box which allows you to select a disk from which to create a disk image that is an exact representation of the selected disk and its contents.
Displays a dialog box which allows you to select a folder from which to create a disk image. Disk Copy will copy the contents of the folder to a disk image file.
Displays a dialog box which allows you to create a new empty read/write disk image.
Displays a dialog box which allows you to select a disk image to mounted on the desktop.
Use this menu to mount, create, or convert disk images.
Hides the Disk Copy log window.
Shows the Disk Copy log window.
Displays a dialog box which allows you to customize various aspects of Disk Copy’s operation.
Clear the current selected text.
Not available because the active window is not editable.
Inserts the contents of the Clipboard at the insertion point or in place of the selected text.
Places a copy of the selected text on the clipboard.
Not available because the active window is not editable or because there is no selection.
Deletes the selected text and places it on the clipboard.
Not available in Disk Copy.
Undo the last operation.
Use this menu to set Disk Copy’s preferences and show or hide the log window.
Quits Disk Copy.
Closes the active window. Not available because the frontmost window cannot be closed.
Closes the active window.
Displays a dialog box which allows you to select a DiskScript to execute.
A DiskScript is a file containing a list of images and an operation to execute against those images. Examples include launching an application or making floppies.
Use this menu to execute DiskScripts, close windows, and quit Disk Copy.
Displays information about this version of Disk Copy.
